Quick Click

99241 | Fein Turbo I with Quick Click Wall-Hung Separator Kit & 30 Foot Hose

FEIN Turbo I, Quick Click separator bucket, hoses, adapters and accessories.
Image of icons showing a separator pulling debris between a table saw and shop vacuum. Also an image of a dirty vacuum filter.
Image of Quick Click Separator on a 5 gallon bucket with side pictures and info about the commercial grade O-ring gasket, baffle, and that it comes pre assembled.
Images of the 5 gallon bucket and its features including the locking lid, easy to empty, and a handle.
Quick Click adapter sizes and a picture showing someone swapping a hose from one tool to another.
Images showing the crush rings, air relief, and flexibility of the Quick Click adapters.
Images of the Quick Click threaded hose end, click ring and how it connects to a hose and adapters.
Images showing the flexibility, smooth interior and crushproof features of the vacuum hose.
Quick Click handle being used to clean floor and table.
Images showing the features of the wands and floor brush including: how the wand is in two pieces, the swivel head, how it connects to the handle, and that it can clean any hard surface.
Images of the Quick Click wall hanger being capable of holding 100 pounds of weight, designed to fit the 5 gallon Cen-Tec bucket and a separator bucket hung high enough on a wall for a FEIN shop vacuum to sit underneath it.
Images of the adapter connected to a shop vacuum, separator and blast gate.
Images of the adapter connected to a router table, shop vacuum and separator.
Quick Click separator bucket mounted on wall connected to FEIN Turbo I sitting below it.
FEIN Turbo I and Quick Click separator bucket connected to circular saw on table.
Quick Click separator bucket connected to circular saw on table.
Quick Click hose and adapter attached to circular saw.
Quick Click hose and adapter attached to a hand sander tool.
Attaching Quick Click hose to an adapter that's on a circular saw.
Quick Click separator bucket mounted onto white wall.
Side view of Quick Click separator bucket mounted onto white wall.
Black plastic wall mount pieces mounted onto white wall.
Top view of bucket mounted onto wall.
Bottom black plastic wall mount holding up a bucket.
Diagram showing the difference between the Cen-Tec's smooth interior hose and standard hoses.
Flexing a black Cen-Tec hose.
Close up of someone stepping on a black hose.
Quick Click 5 gallon separator bucket with dimensions.
Quick Click separator with dimensions.
Front view of FEIN Turbo I.
Right side view of FEIN Turbo I.
Left side view of FEIN Turbo I.
Back view of FEIN Turbo I.
Inside view of FEIN Turbo I bin.
Close up of hose connection inside bin with metal grounding pin.
Bottom view of top section of FEIN Turbo I.
FEIN Dust Collectors | Cen-Tec Systems
Improve Your Workshop Dust Collection with the Quick Click Separator!
Wall Mounted Separator: Keep Your Shop Clutter Free and Clean!
FEIN Turbo I, Quick Click separator bucket, hoses, adapters and accessories.
Image of icons showing a separator pulling debris between a table saw and shop vacuum. Also an image of a dirty vacuum filter.
Image of Quick Click Separator on a 5 gallon bucket with side pictures and info about the commercial grade O-ring gasket, baffle, and that it comes pre assembled.
Images of the 5 gallon bucket and its features including the locking lid, easy to empty, and a handle.
Quick Click adapter sizes and a picture showing someone swapping a hose from one tool to another.
Images showing the crush rings, air relief, and flexibility of the Quick Click adapters.
Images of the Quick Click threaded hose end, click ring and how it connects to a hose and adapters.
Images showing the flexibility, smooth interior and crushproof features of the vacuum hose.
Quick Click handle being used to clean floor and table.
Images showing the features of the wands and floor brush including: how the wand is in two pieces, the swivel head, how it connects to the handle, and that it can clean any hard surface.
Images of the Quick Click wall hanger being capable of holding 100 pounds of weight, designed to fit the 5 gallon Cen-Tec bucket and a separator bucket hung high enough on a wall for a FEIN shop vacuum to sit underneath it.
Images of the adapter connected to a shop vacuum, separator and blast gate.
Images of the adapter connected to a router table, shop vacuum and separator.
Quick Click separator bucket mounted on wall connected to FEIN Turbo I sitting below it.
FEIN Turbo I and Quick Click separator bucket connected to circular saw on table.
Quick Click separator bucket connected to circular saw on table.
Quick Click hose and adapter attached to circular saw.
Quick Click hose and adapter attached to a hand sander tool.
Attaching Quick Click hose to an adapter that's on a circular saw.
Quick Click separator bucket mounted onto white wall.
Side view of Quick Click separator bucket mounted onto white wall.
Black plastic wall mount pieces mounted onto white wall.
Top view of bucket mounted onto wall.
Bottom black plastic wall mount holding up a bucket.
Diagram showing the difference between the Cen-Tec's smooth interior hose and standard hoses.
Flexing a black Cen-Tec hose.
Close up of someone stepping on a black hose.
Quick Click 5 gallon separator bucket with dimensions.
Quick Click separator with dimensions.
Front view of FEIN Turbo I.
Right side view of FEIN Turbo I.
Left side view of FEIN Turbo I.
Back view of FEIN Turbo I.
Inside view of FEIN Turbo I bin.
Close up of hose connection inside bin with metal grounding pin.
Bottom view of top section of FEIN Turbo I.

99241 | Fein Turbo I with Quick Click Wall-Hung Separator Kit & 30 Foot Hose

$702.85

Bulk discount rates

  • Buy 3+ pay only $604.55 each
  • SKU: 99241
  • Weight: 47.00 LBS
  • Shipping: Calculated at Checkout
    • In Stock!
    Current Stock:Only left:
Description
Overview:
Elevate your dust collection efficiency with the Turbo I premium wet-dry dust collection vacuum paired with the Quick Click separator, featuring a five-gallon collection bin designed for wall mounting in your garage, workshop, or workspace. This setup optimizes valuable floor and shelf space while providing powerful suction and effective dust management.
 
Features and Benefits:
  • The system includes a robust 30-foot crush-proof, 1.25-inch vacuum hose that connects seamlessly from the separator to your vacuum, allowing for effective source capture from power tools or general cleanup tasks.
  • A 1.5 inch x 6-foot commercial-grade hose and necessary adapters facilitate quick setup, ensuring you're ready to tackle any project.
  • The Quick Click Separator is engineered for superior separation, capturing 99% of dirt and debris, including the finest dust particles.
  • By preventing debris from reaching your vacuum, this separator prolongs the life of your vacuum motor, filters, and dust bags, ultimately saving you money on replacements.
  • The separator features an innovative design features curved surfaces and a wider diameter to minimize turbulence, enhancing cyclonic separation efficiency.
  • The unique baffle system effectively traps fine particulates in the collection bin, further improving dust capture.
  • Designed for both dry and wet debris, this separator is ideal for various environments, including workshops, garages, and flooded basements.
  • The separator's inlet and outlet accept the standard 2.25 inch male connector found on most home shop vacuums, allowing you to utilize your vacuum's original accessories with ease.
  • The five-gallon, heavy-duty, high-density polyethylene pail features a threaded ratcheting lid with a sealed gasket for reliable, long-lasting performance.
  • The wall-mounted design, supported by a hook and under-bin support, holds up to 100 pounds of debris, ensuring the separator and lid remain accessible while mounted.
  • The ratchet system keeps the bin securely closed until the release lever is engaged.
  • Included with the system is a versatile seven-piece Quick Click adapter set, designed to connect to various power tools equipped with dust collection shrouds in sizes 0.75", 1", 1.25", and two 1.5".
  • These thermoplastic rubber connectors are molded for flexibility with internal rings that can accommodate shrouds up to 15% larger than indicated sizes.
  • A dedicated fume and dust adapter allows for effective dust capture around tools without shrouds, making it ideal for crafting and fine-detail work.
  • Features a flexible hose adapter with a 360-degree curved end, perfect for connecting dusting tools, upholstery brushes, and crevice tools for thorough cleanup.
  • Two 19" metal wands with nylon collars and a 12" natural fill floor brush extend the capabilities of the 30-foot hose, making floor cleaning in your garage or workshop effortless.
  • To ensure easy storage and transport, a mesh caddie bag is included, allowing you to quickly identify and access all components when needed.
  • The Turbo I vacuum delivers superior performance with 150 CFM airflow and 98 inches of water lift, efficiently capturing and conveying debris back through the separator.
  • By incorporating the Quick Click separator into your setup, you significantly reduce vacuum ownership costs by extending the lifespan of filter bags and the replaceable cellulose filter that comes with the Turbo I.
  • Engineered for excellence, this German-designed vacuum features premium components, including 360-degree casters, a reliable grounded connection, a commercial-grade 25-foot power cord, and a durable collection bin.
  • Transform your dust collection experience with the Turbo I premium wet-dry dust collection system and Quick Click separator, designed for efficiency, durability, and unparalleled performance.
Compatibility:
  • Both the intake from the working hose and out-take to the vacuum accept industry typical 2.25" hose connections. This dimension is often described as 2.5" or 1 7/8" in vacuum literature. Measure the male end of intended hoses to confirm your diameter.
  • Cen-Tec's hose is designed to fit all major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric.
  • The separator inlet is designed to fit most hoses that come with major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 ½" vacuum connection.
 
The system comes fully assembled and checked to ensure a leak proof system so it can go directly into service at your location.
 
Not sure what to buy? Check out our Separator Guide.
 
Vaccum made in Germany.
All components designed, produced, and assembled in the USA.
 
made-in-usa.jpg
 
 

Related Products

FEIN vacuum, static dissipative Quick Click separator, hoses and adapters.
Quick view

99252 | Fein Turbo I Static-Dissipative Quick Click Wall-Hung Separator Kit with 16 Foot Hose

99252
$702.85
Overview: The 99252 static dissipative Quick Click separator is engineered to provide a safe, effective path to ground for discharging any static charge from power tools. This innovative system...
Bulk Pricing
Add to Cart
Add to Cart
Quick view
Quick Click separator bucket, hoses, adapters and accessories.
Quick view

99230 | Quick Click Wall-Hung Separator Kit with 30 Foot Hose & Cleaning Accessories

99230
$199.35
Overview: The Quick Click separator with a five-gallon collection bin is expertly designed for wall mounting in your garage, shop, or workspace, maximizing your available floor and shelf space...
Bulk Pricing
Add to Cart
Add to Cart
Quick view
Static dissipative Quick Click separator, hoses and adapters.
Quick view

99263 | Static-Dissipative Quick Click Wall-Hung Separator Kit with 16 Foot Hose

99263
$201.50
Overview: The 99263 Quick Click solution is a comprehensive dust management system designed to minimize static electricity from your power tools to your vacuum. This advanced solution combines a...
Bulk Pricing
Add to Cart
Add to Cart
Quick view
Aeon vacuum, Quick Click separator with bucket, hoses and cleaning accessories.
Quick view

99439 | Aeon 7 Gallon Wall-Hung HEPA Commercial Vacuum with Quick Click Separator & 30 Foot Hose

99439
$670.60
Overview: The 99439 combines a premium wall hung HEPA filtration vacuum, a wall hung 5 gallon debris separator, Quick Click 6 piece dust collection adapter set, a 1.25" X 30 foot commercial grade...
Bulk Pricing
Add to Cart
Add to Cart
Quick view

Recently Viewed