Hose Cuffs and Clamps

The 42814 is a gray, non-banded cuff that fits into 1.375" (35mm) connections.

The 42869 electric banded gray hose cuff fits 1.25" (32mm) ends. It is used to thread on to the end of a hose.

The 42825 gray hose cuff fits 1.25" (32mm) ends. It is used to thread on to the end of a hose.

The 37369 non-banded swivel black hose cuff fits 1.25” (32mm) ends. It is used to thread on to the end of a hose.

The 35092 non electric inlet black hose cuff without band fits 1.25” (32mm) ends. It is used to thread on to the end of a hose.

The 45597 is a 5.7" central vacuum connector tube with flange and gray cuff. It fits 1.25" (32mm) connections.

Overview: A common central vacuum hose end designed to thread on a 1.25" inner diameter crush proof plastic hose and provide a metal contact ring to activate the central vacuum in central vacuum pin jack inlet valves.  Features and...

The 42913 electric banded short-nose black hose cuff fits 1.375" (35mm) ends. It is used to thread on to the end of a hose.

Overview  The 61210 is a swivel-nosed black cuff with a threaded end. It fits 1.5" (38.1mm) end connections. Features and Benefits Fits all standard commercial hose Fits 1.5 inch end connections This swivel nosed cuff easily threads onto vacuum...

Overview: This versatile 66204 90 degree swivel cuff from Cen-Tec fits all standard commercial vacuum fittings at 1.5 Inch. It offers a full 90 degree swivel motion and works with all major backpack brands. Features and Benefits: Compatible with...

Overview The 68239 PVC threaded cuff is designed for a positive threaded connection onto 1.5” wire support vacuum hose and is compatible with the 65555 1.50” hose sold by Cen-Tec Systems. Four threaded channels are designed to match and...

Features and Benefits The 60577 is designed to thread on to the exterior profile of industry standard 1.5” inner diameter crush proof plastic hoses with a female slip end measuring 2” on the inner diameter. The 60577 allows a 1.5”...

Connects two 1.5" hoses together with a 360 degree swivel connection.

Features and Benefits The 2” slip end can rotate 360 degrees; independently of the thread end, allowing for easier manipulation of the connection. The 69900 female slip end design permits rotation around a fixed point help to reduce kinking and...

Features and Benefits The 65401 allows a 2” commercial vacuum hose to be use with vacuums and accessories with 1.5” connecting points. The 65401 is molded using 85-90 shore PVC permitting the threads engaging the hose a degree of flexibility...

Features and Benefits The 61314 is molded using a 85-90 shore PVC permitting the threads engaging the hose a degree of flexibility accommodating minor variations in the pitch and spacing of the hose corrugations.  The opposing ends of the...

Anti-static, conductive hose cuff that fits 1.25" (31.75mm) hoses.

Features and Benefits The conductive 66875 allows for a conductive connection between a conductive vacuum hose and engaging with vacuums and accessories with 2” connecting points Molded in a conductive resin providing <10 to the sixth surface...

Overview Package of six (6) 2" right hand bridge clamps.   Features and Benefits Bridge clamps are so described as the band is designed to follow the pitch of the hose with a stainless bridge over the wire to ensure a positive no leak seal. 201...

Features and Benefits The 34982 PVC socket cuff threads onto a 1.25" crush proof plastic hose and presents a 1.50" slip female end.  The 34982 will fit male into the tradtional Dust Deputy tangential port.  The 34982 permits one to...

Overview Comprised of six (6) 37mm (1.3) to 57mm (2.25") key clamps.   Features and Benefits 201 stainless steel band 0.5" wide. Zinc-plated carbon steel screw. ABS molded plastic key  Adjustable diameter from 1.3" to 2.25". Key...

Features and Benefits The 34707 PVC molded cuff threads onto a 1.25" inner diameter crush proof vacuum hose and present a 1.50" slip end compatible with male fit 1.50" commercial accessories such as dusting tools, upholstery tools, and crevice tools...

Overview Six (6) 2.5" stainless bridge clamps adjustable from 46mm (1.81")  to 70mm (2.75") using a flat or Phillips screw driver.   Features and Benefits 201 stainless steel band 0.5" wide. Zinc-plated carbon steel screw. Stainless...

Overview Six (6) 2.5" Key clamps adjustable from 46mm (1.81") to 70mm (2.75") without a tool using the ABS key.   Features and Benefits 291 stainless steel 0.5" wide band and housing. Zinc plated carbon steel screw. ABS adjustment key. Key...

Overview: The 41202 is an adaptor designed to fit male into hose cuffs with an inner diameter of 1.50" hose. Project from the cuff will then be a male 1.25" end designed to fit standard 1.25" wands, and accessories including dusting tools, upholstery...

Features and Benefits: The 41851 is designed to accept a male shop vacuum hose end or fitting measuring 2.25" in diameter. The adapter has a unique collapsible membrane that permits it to lock on and provide a dust proof shield on male fitting from 2...