Overview:

A 1.50" X 50 foot static dissipative crush proof plastic hose with superior dissipative properties. The hose provides surface resistivity (Ohm/sqr) of <10^6th and a resistance of 1 meter of hose (mega ohm/m) < 0.1. The hose is produced using a conductive TPE (thermo-plastic elastomer) and represents our highest level of resistivity. A red overlay ensures against abrasion and prevent the hose marking surfaces.

Features and Benefits:

• The hose is produced using a hot melt process to provide for no visible weld increasing flexibility and hose service life.
• The unique hot melt process provides for a smooth interior optimizing airflow, a non directional bias to air flow, and reduced risk of clogging.
• The red overlay wear strip adds abrasion resistance, increased hoop strength, and prevents the risk of marking a surface contacted by the hose during application.
• Lightweight at 0.6 pounds per meter.
• Pair with the 66864 or 43171 dissipative hose ends to provide for a a female 1.50" smooth interior surface for easy application.

Specifications:

Plastic: TPE (thermo-plastic elastomer) conductive.

Temperature range -20C to + 50 C.

Internal diameter 38 mm (1.50").

Outer diameter 47.2 mm (1.85").

Weight per meter: 274 grams (0.6 Lbs.)

Resistance of 1 meter of hose (MOhm /meter) < 0.1

Surface resistivity: <10^6.

Maximum recommended vacuum (Bar) 0.5.

Bend radius: 4" measured on the inner dimension.

Chemical resistance: Resistant to most non-oxidizing acids and alkalis and salt solutions. It is not resitant to oxidizing acids, halogens, aromatics, liquid hydrocarbons, alcohols, esters, ketones, and similar.

Compatibility:

Compatible with 66864 and 43171 dissipative threaded hose ends.