Overview:
A 1.50" X Quick Click commercial dust collection system compatible with all major brands of home shop and dust collection vacuums. The solution includes four dust collection adapter measuring 1.00"; 1.25"; 1.50"; and a passive 5.5" X 3.5" shroud. A two piece commercial s-wand, 14" nylon floor brush, dusting tool, upholstery tool, and 15" paddle crevice included for general shop clean-up.
Features and Benefits:
- The 1.50" X crush proof plastic vacuum hose has a smooth interior to optimize air flow and is highly flexible for ease of use.
- The hose is terminated each end with a 1.50" inner diameter swivel nose hose cuff to permit the adapters to rotate 360 degrees at the working end of the hose and again where the hose meets the vacuum to reduce stress on the users wrist and forearms. The 360 degree rotation facilitates free movement of power tools when connected to the power tool dust shroud.
- Three molded TPE dust shroud adapters inner diameter 1.00"; 1.25"; 1.50" fit male into the 1.50" hose ends.
- The 1.00", 1.25"; and 1.50" adaptors are molded in a soft TPE (Thermo-Plastic Elastomer) material which permits the adapters to stretch over dust shrouds up to 15% larger than the measured inner diameter.
- Crush rings on the inner diameter of the adapters grip the dust shroud to prevent them slipping from the shroud during use.
- A static 5.5" X 3.5" shroud is designed for use with tools lacking a built in dust collection shroud such as common use Dremel's.
- Adapters to fit to industry standard 2.50" diameter home shop vacuums as well as vacuums with 2.63" inner diameter openings.
- A two piece 1.50" X 54" commercial s-wand with ABS compression coupling fits male into the hose end.
- A 14" wide nylon floor nozzle with generous fill for shop and garage floor clean-up.
- A 4" dusting tool with natural fill, a 5" upholstery tool, and a 15" paddle crevice are ideal for general work station clean-up and use in vehicles if so desired.
Common Questions:
Why would I want to use a 1.50" Quick Click hose and adapter set?
A 1.50" inner diameter hose has 44% more cross sectional area than a 1.25" inner diameter hose meaning higher airflow delivered to the power tool from your vacuum. It reduces the risk of clogging.
What is the trade off in going to a larger diameter hose?
You are trading significantly higher airflow for a modest change in flexibility. The 1.50" hose has a bend radius approaching 4.00" as compared to a 1.25" hose bend radius of 3.00".
When would a 1.50" Quick Click solution might be most beneficial?
When you are using multiple tools drawing from the same vacuum the larger diameter will optimize the airflow. It can also benefit when the debris being collected is larger in size helping to convey the debris back to the vacuum. It should also be considered when working in commercial environments like concrete coring, tile cutting, grinding, or counter top surface cutting.
Compatibility:
Compatible with all major brands of home shop vacuums including Rigid, Craftsman, Shop Vac, Dewalt, Bauer, and Vac Master equipped with 2.25" and 2.63" inner diameter hose connections. Compatible with premium brand dust collection vacuums including Festool, Fein, Starmix, and Bosch. Compatible with the full range of Cen-Tec System cleaning accessories designed for use with 1.50" inner diameter hose ends.
