• 1-1/4" diameter commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1”, 1-1/4”,  and two 1-½” internal and external connections for dust collection.
• The highly flexible 1.25" inner diameter commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow.
• Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into each adapter providing you the control necessary to prevent tool stick. 
• The Quick Click system makes for fast connections to dust shrouds of all major brands of hand held and stationary power tools.
• The adapters inner diameters measure .750"; 1.00"; 1.25"; and 1.50" molded in soft TPE rubber fittings are designed to accept and hold male dust shroud connections. 
• The Quick Click systems allows you to change from tool to tool in seconds saving you time.
• Each adapter provides a 360 degree swivel connection to prevent the hose from kinking or restricting free movement of the power tool.
• An additional 2 ½" cuff (included) fitted to one of the two 1.50" adapters allows you to use dust collection workstations with 2.25" inner diameter dust collection ports popular on table saws.
• Each adapter can expand to fit tools up to 15% larger than the diameter. Crush rings molded into each adapter flatten to better hold your tools.
• The Cen-Tec proprietary 2.25" diameter male vacuum end optimizes airflow. 
• The 3.5" X 6" passive dust collection shroud is ideal for collecting dust created by tools like Dremel's lacking dust collection shrouds. 

Common Questions:

"I have a Dewalt palm sander that has a dust shroud measuring 1.65" on the outer diameter. What adapter do I need to fit this sander?"

- The 41048 adapter which has a measured 1.50" inner diameter will expand to fit over your Dewalt palm sanders dust shroud. The soft 55 shore TPE material will stretch in diameter without risk of damage or splitting. In addition three concentric crush rings are molded into the interior of the adapter. These flatten to further increase the diameter and increase the surface contact with the dust shroud improving hold as you manipulate the sander.

"I have a Festool vacuum and a number of Festool tool accessories, will the 99912 work with my Festool?"

- Yes. The vacuum end of the 99912 will fit male into your Festool vacuum. The most common Festool dust shroud accepts the 1.00" 41026 included in the 99912 Quick Click kit.

"Will the 99912 work with my Craftsman table saw that has a 2.25" inner diameter dust collection port?"

- Yes. Combining the 41048 with the 63228 you can fit the hose to your table saws dust collection port.

• Cen-Tec's hose is designed to fit all major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool, Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric. The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 ½" vacuum connection.