Hose Cuffs and Clamps

The 42814 is a gray, non-banded cuff that fits into 1.375" (35mm) connections.

The 42869 electric banded gray hose cuff fits 1.25" (32mm) ends. It is used to thread on to the end of a hose.

The 42825 gray hose cuff fits 1.25" (32mm) ends. It is used to thread on to the end of a hose.

The 37369 non-banded swivel black hose cuff fits 1.25” (32mm) ends. It is used to thread on to the end of a hose.

The 35092 non electric inlet black hose cuff without band fits 1.25” (32mm) ends. It is used to thread on to the end of a hose.

The 45597 is a 5.7" central vacuum connector tube with flange and gray cuff. It fits 1.25" (32mm) connections.

Overview: A common central vacuum hose end designed to thread on a 1.25" inner diameter crushproof plastic hose and provide a metal contact ring to activate the central vacuum in central vacuum pin jack inlet valves. Features and Benefits: Approximate...

The 42913 electric banded short-nose black hose cuff fits 1.375" (35mm) ends. It is used to thread on to the end of a hose.

Overview  The 61210 is a swivel-nosed black cuff with a threaded end. It fits 1.5" (38.1mm) end connections. Features and Benefits Fits all standard commercial hose Fits 1.5 inch end connections This swivel nosed cuff easily threads onto vacuum...

Overview: This versatile 66204 90 degree swivel cuff from Cen-Tec fits all standard commercial vacuum fittings at 1.5 Inch. It offers a full 90 degree swivel motion and works with all major backpack brands. Features and Benefits: Compatible with...

Overview:The 68239 PVC threaded cuff is designed for a positive threaded connection onto 1.5” wire support vacuum hose and is compatible with the 65555 1.50” hose sold by Cen-Tec Systems. Four threaded channels are designed to match and hold...

Features and Benefits: Designed to thread on to the exterior profile of industry standard 1.5” inner diameter crush proof plastic hoses with a female slip end measuring 2” on the inner diameter. Allows a 1.5” commercial vacuum hose to...

Overview: A 1.25" dissipative ABS adapter that threads on a 1.25" inner diameter spiral would vacuum hose and steps up to a 2.25" male common to home shop vacuum and premium brand dust collection vacuums including Fein, Festool, Bosch, Metabo, and...

Overview: High impact ABS threaded adapter to fit 1.25" spiral would hose to a 2.25" outside diameter press fit to common hose shop vacuums like Rigid, Craftsman, and similar. Also compatible with bands including Festool, Fein, Bosch, Metabo, and Starmix...

Connects two 1.5" hoses together with a 360 degree swivel connection.

Features and Benefits: The 2” slip end can rotate 360 degrees; independently of the thread end, allowing for easier manipulation of the connection. The female slip end design permits rotation around a fixed point help to reduce kinking and...

Features and Benefits: Allows a 2” commercial vacuum hose to be use with vacuums and accessories with 1.5” connecting points. Molded using 85-90 shore PVC permitting the threads engaging the hose a degree of flexibility accommodating minor...

Features and Benefits: Molded using a 85-90 shore PVC permitting the threads engaging the hose a degree of flexibility accommodating minor variations in the pitch and spacing of the hose corrugations. The opposing ends of the 61314 are each designed for...

Anti-static, conductive hose cuff that fits 1.25" (31.75mm) hoses.

Features and Benefits: Allows for a conductive connection with a conductive vacuum hose. Connects to vacuums and accessories with 2” connecting points. Molded in a conductive resin providing <10 to the sixth surface resistivity. The thread...

Overview: Package of six (6) 2" right hand bridge clamps.   Features and Benefits: Bridge clamps are so described as the band is designed to follow the pitch of the hose with a stainless bridge over the wire to ensure a positive no leak seal...

Features and Benefits The 34982 PVC socket cuff threads onto a 1.25" crush proof plastic hose and presents a 1.50" slip female end.  The 34982 will fit male into the tradtional Dust Deputy tangential port.  The 34982 permits one to...

Overview Comprised of six (6) 37mm (1.3) to 57mm (2.25") key clamps.   Features and Benefits 201 stainless steel band 0.5" wide. Zinc-plated carbon steel screw. ABS molded plastic key. Adjustable diameter from 1.3" to 2.25". Key clamps are...

Features and Benefits The 34707 PVC molded cuff threads onto a 1.25" inner diameter crush proof vacuum hose and present a 1.50" slip end compatible with male fit 1.50" commercial accessories such as dusting tools, upholstery tools, and crevice tools...

Overview: Six (6) 2.5" stainless bridge clamps adjustable from 46mm (1.81")  to 70mm (2.75") using a flat or Phillips screw driver.   Features and Benefits: 201 stainless steel band. 0.5" wide. Zinc-plated carbon steel screw. Stainless...

Overview: Six (6) 2.5" Key clamps adjustable from 46mm (1.81") to 70mm (2.75") without a tool using the ABS key.   Features and Benefits: 291 stainless steel. 0.5" wide band and housing. Zinc plated carbon steel screw. ABS adjustment key...

Overview: The 41202 is an adapter designed to fit male into hose cuffs with an inner diameter of 1.50" hose. Project from the cuff will then be a male 1.25" end designed to fit standard 1.25" wands, and accessories including dusting tools, upholstery...

Features and Benefits: The 41851 is designed to accept a male shop vacuum hose end or fitting measuring 2.25" in diameter. The adapter has a unique collapsible membrane that permits it to lock on and provide a dust proof shield on male fitting from 2...