• Lengths of 30 foot (92718A) 35 foot (93070) 40 foot (93048) and 50 foot (93059) are available.
• The lightweight, highly flexible, low volt electric hose is made in the USA and is designed to activate and deactivate the central vacuum power unit through industry standard pin jack inlet valves.
• The hose will work with standard accessories and any industry air turbine nozzles.
• A 10" multi-surface nozzle which works equally well on carpet and hard floor surfaces make surface transitions possible without changing tools.
• A deep air flow channel runs the full width of the tool with openings on each side to increase edge cleaning effectiveness.
• A directional lint brush sits in front and behind the opening to the vacuum capturing on the push stroke and releasing on the pull stroke fibrous material from a carpeted surface.
• A nylon brush strip running the width of the tool is designed to pivot up into the tool on the forward stroke and become stiff on the pull stroke for grooming of a carpets surface.
• A USA-made 12" hard floor vacuum brush with natural fill for cleaning hard wood, tile, stone, laminate, and vinyl flooring is included.
• A fully adjustable ratchet telescopic vacuum wand connects the floor nozzles and above the floor accessories to the electric vacuum hose.
• The wand can be adjusted at 1" intervals from 29" to 39" fully extended.
• Vacuum accessories for above the floor cleaning are included: a dusting brush, a 5" wide upholstery tool, and a 13" crevice tool.
• A high impact hose hanger is included for storage of the hose.
• A mesh carry bag which allows for easy identification of the desired tool is included for transport.

• This kit is compatible with all major brands of central vacuums installed using industry standard wall inlets including Beam, Electrolux, Eureka, Vacuflo, Dirt Devil, Vacumaid, Cyclovac, M&S AIrvac, MD, Nutone, Canavac, Star Power, and Imperium.

The hose is NOT for use with an electric power nozzle.