Overview:
The Aeon is a garage and work shop HEPA air blast and vacuum complimented with a full range of cleaning and air blast accessories for automobiles, work benches, and floors including a 1.25" X 50 foot commercial grade hose, with Quick Click connections for general cleaning tasks like vacuuming out the car or as an air blast for drying a car, motorcycle, pet or cleaning floor surfaces and work stations.
Features and benefits:
- A powerful HEPA filtered Aeon vacuum that can be used for general cleaning or as an air blaster for drying cars and motorcycles and application where positive pressure airflow is beneficial.
- The Aeon vacuum provides 128" of water lift and 140 CFM well beyond the typical home shop vacuum. 120 Volt. 13 amps operating. On / off control is achieved through a toggle switch on the lower right side of the vacuums body.
- Aeon equipped with an Ametek motor designed to deliver 500 hours of operation.
- The Aeon vacuum hangs on the wall saving valuable floor or shelf space and can be set up for either left or right side intake to accommodate the configuration of your shop or garage.
- The Aeon vacuum is ideal for effective cleaning of cars, the work bench, commercial work stations, as well as floor surfaces.
- The HEPA filter bag insures clean air delivery through the optional blaster or vacuuming your work space protecting you from harmful fine particulate. The 12 gallon filter loads through the top of the unit. Releasing the lid latches to gain access for a quick dust free change.
- Switching to the air blast system using the 3/4" soft nozzle you are provided an air stream of 7000 feet per minute, 80 mph, for cleaning off uneven surfaces like a miter saw, a garage floor of leaves, or your car surface of water after washing. The power is enhanced due to the 2" inlet into the Aeon optimizing airflow.
- A 1.25" X 50 foot hose is equipped with the Cen-Tec exclusive Quick Click system allowing you to easily connect a full compliment of traditional vacuum accessories or when desired the air blast nozzles.
- To transition from vacuum to air blasting takes a few seconds as you position the hose from the vacuum inlet to the blowing outlet letting you vacuum the car and then air blast away the water after washing using the same hose.
- Connecting the Quick Click curved end with the hose on the suction side you can use the cleaning accessories for vacuuming your car using the articulated dusting tool, upholstery tool, or crevice tool, the floor using the 12" natural fill floor brush through the ratchet telescopic extension wand to make the connection.
- Connecting the 3/4" Quick Click blaster nozzle with the hose on the blower side for drying the car, blowing debris out of hard to access spaces, cleaning off your work bench or power tools. A 1.5" Quick Click blaster nozzle provides a softer air stream ideal for drying a pet.
- The same 3/4" , 1" and 1.5" Quick Click adapters can be used to connect to your power tools for dust collection.
- A mesh caddy bag holds all the accessories and can hang on the same hanger used to store the 50 foot hose.
Compatibility:
Combines the vacuum with an air blast serving dual purposes in your garage or workshop. Ideally connected to a 120V grounded electrical inlet on a 20 amp circuit.
