Cen-Tec Systems

90413 Cen-Tec 1.5" Single Piece Commercial S-Wand with 14" Squeegee Tool

90413 Cen-Tec 1.5" Single Piece Commercial S-Wand with 14" Squeegee Tool

$56.65
  • SKU: 90413
  • Weight: 6.00 LBS
  • Shipping: Calculated at Checkout
  • In Stock!
    Current Stock:Only left:
Description

Overview:

A 1.50" single piece commercial vacuum s-wand with high impact ABS locking collar. A 14" wide natural rubber squeegee tool designed to fit and lock onto the commercial s-wand. The wand is designed to fit male into the vacuums hose end that has an inner diameter of 1.50". Intended for wet-dry use with commercial or domestic vacuum equipped to accept liquids, slurry and similar. Not four use with hazourdous petrochemical spills like gasoline or oils. 

Features and benefits:

  • The single piece 1.50" commercial s-wand features a scratch proof finish and is produced in a durable material to insure years of reliable service. 
  • The high impact ABS collar with locking spring is designed to accept and hold the squeegee in place preventing unintended separation. The collar is chemical resistant making it suitable for use with hard floor strippers and similar. 
  • The s-wand design keeps the squeegee flat to the surface for more effective capture of liquids. 
  • The 14" wide natural rubber bladed squeegee is designed for single pass capture of liquids and slurries. 
  • The squeegee blades are reinforced with a second supporting bladeto prevent collapse even under high vacuum. 
  • Natural rubber blades are more effective in use on uneven floor surfaces. 

Common questions:

Would this be a suitable solution for use in my concrete resurfacing and cutting applications?

Yes. The system is designed for rough use and the effective capture of slurries created to capture and reduce dust. 

Can I use this with my home shop vacuum when I clean up my garage. 

Yes. As long as your home shop vacuum is equipped with a hose terminating in a hose end with a cuff 1.50" in inner diameter. Recognize home shop vacuums come with  hoses in diameter. 1.25"; 1.50"; 1 7/8"; and 2.5". If you have a vacuum with a hose of 1.25", 1 7/8"; or 2.5" our first recommendation is you consider a hose like the 95435 which is compatible with this solution and home shop vacuums of all sizes. 

 

Compatibility:

Compatible with all commercial wet-dry vacuums and hose shop vacuums equipped with a hose terminating with a hose end measuring 1.50" across the the inner diameter.