Overview:

A 1.50" single piece commercial vacuum s-wand with high impact ABS compressions collar for attaching the related multi-surface vacuum nozzle. The ABS compression collar utilizes a compression spring to secure the nozzle to the wand eliminating the chance of un-intended separation of the tool. The wand is designed to fit male into hoses terminating with a hose end with an inner diameter of 1.50". The 14" wide based multi-surface tool is suitable for use on both carpeted, hard floor, and walk off mats.

Features and benefits:

• The 1.50" commercial vacuum s-wand has a scratch proof finish that will maintain its appearance over years of commercial use.  
• The high impact, chemical resistant, ABS compression collar uses a threaded nut and spring system to lock the cleaning nozzle in place at the wand end. 
• The s-wand configuration provides a comfortable handle of the user and keeps the floor nozzle parallel to the surface for more effective cleaning. 
• The wand and floor nozzle are suitable for both wet and dry use. 
• The 14" wide based multi-surface carpet and hard floor cleaning nozzle is designed for use across all floor types eliminating the need to change tools as the floor surface changes. 
• A 10" wide nylon brush strip is built into the tool which helps to groom carpeted surface on the draw stroke. The brush engages the carpe pile opening it to allow airflow from the vacuum to pull embedded dirt. 
• Deep airflow channels at the tools end provide for the airflow necessary for effective edge cleaning. 

Common questions:

Is this solution suitable for use with my commercial back pack vacuum? 

Yes, as long as your back pack vacuum is equipped with a hose that terminates in an end with a 1.50" inner diameter. 

Can I use this solution on sealed concrete floors?

Yes the tool is designed for effective use on all floor types including sealed concrete. 

We clean entry areas of the office which has both carpeted walk off mats which can capture melted snow in the winter leaving them wet. Can this solution accept the moisture?

Yes. This solution can be used on wet surfaces. Make sure that your vacuum is equipped for wet-dry use. Most commercial back pack vacuums are not suitable for use on wet surfaces. They often use paper bags and have flow through motors which are not compatible with wet use. Review your vacuums manual to confirm it is suitable for wet debris collection. 

Compatibility:

Compatible with commercial back pack vacuums, commercial dry and wet-dry vacuums, and home shop and contractor  vacuums equipped with hose terminating at the end with a 1.50" inner diameter to accept the 1.50" male fit end of the s-wand.