Overview:
90271 is designed to provide a high volume (12 gallon) collection bin for collecting wet or dry debris captured by the Quick Click separator which collects over 99% of debris in an easy to empty bin in advance of the vacuum. A separator helps preserve filter life and reduces the risk of motor failure due to airflow restriction through the vacuum motor because of clogged filters.
Features and Benefits:
-
The use of a separator saves you time and money by reducing the frequency with which you replace your vacuum bags and filters.
-
The Quick Click separator can be used either with or without the installed baffle depending on the debris profile being collected.
-
The baffle increases the effective collection of fine debris which is more damaging to filters and presents the highest health risk to the user.
-
The baffle limits collection of larger debris (excess of 0.75") in diameter as it cannot pass between the baffle plate and the wall of the separator.
-
Even without the baffle, debris collection will exceed 95% effectiveness of all debris.
-
The separator is mounted on a 12-gallon heavy-duty, high-density polyethylene collection bin.
-
A ratcheting screw lid with sealing gasket for easy opening and closing to make emptying of the bin easy and reliable.
-
Unlike pry lids, the screw lid feature will not degrade over time providing years of reliable service.
-
The wide base of the 12-gallon bin makes the solution more stable in use as compared to the common 5-gallon solutions.
-
A unique ratchet locking feature ensures the bin will not open unintentionally during transport making it ideal for use by remodeling contractors or disaster recovery firms.
-
The bin is equipped with an air relief feature which helps ensure against a sealed suction condition which can contribute to reduced motor life.
-
The air relief feature can be adjusted to meet conditions. We recommend the relief be adjusted to open as the system approaches a 95% sealed condition.
Compatibility:
- Both the intake and from the working hose and out-take to the vacuum accept industry typical 2.25" hose connections. This dimension is often described as 2.5" or 1 7/8" in vacuum literature. Measure the male end of intended hoses to confirm your diameter.
- Cen-Tec's hose is designed to fit all major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric.
- The separator inlet is designed to fit most hoses that come with major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 ½" vacuum connection.
The 90271 comes fully assembled and ready for immediate use. Dimensions assembled 17" X 17" X 35".
Separator Manual
